wiki:fpv - Wiki du FabLab la Côte

Vous êtes ici : start » wiki » fpv

Cette page est en lecture seule. Vous pouvez afficher le texte source, mais ne pourrez pas le modifier. Contactez votre administrateur si vous pensez qu'il s'agit d'une erreur.

===== FPV =====

Documents et sources en complément de l'atelier

===== Matériel =====

ELECTRONIQUE :

- Goggle: **[[https://fpvracing.ch/en/goggles-monitors/1054-quanum-fpv-goggle-v2-pro-diy-kit.html|Quanum DIY FPV Goggle V2 Pro**]]**\\
- Camera: **[[https://fpvracing.ch/en/cameras/1289-runcam-swift-600tvl-ir-blocked-25mm.html|RunCam Swift**- 600TVL - IR Blocked]]**\\
- Batteries: **[[https://hobbyking.com/en_us/turnigy-nano-tech-1300mah-3s-45-90c-lipo-pack.html|Turnigy nano-tech**1300mAh 3S 45~90C]]** or **[[https://hobbyking.com/en_us/zippy-compact-1300mah-3s-25c-lipo-pack.html|ZIPPY Compact**1300mAh 3S 25C]]**\\
- Receiver: **[[http://www.banggood.com/Boscam-RC58-40CH-40CH-5_8G-Wireless-AV-Receiver-with-LED-Digital-Display-p-1025267.html?p=7G14111777398201506Z|Boscam RC58-40CH**40CH 5.8G Wireless]]** \\
- Transmitter: **[[http://www.banggood.com/Eachine-ET526-5_8G-40CH-25mW200mW600mW-Switchable-FPV-Transmitter-p-1075702.html?p=7G14111777398201506Z|Eachine ET526**5.8G 40CH 25mW/200mW/600mW Switchable FPV Transmitter]]**\\
- LC Filter: [[https://fpvracing.ch/en/fpv-accessories/375-l-c-power-filter-17a.html|L-C Power Filter 1.7A]]\\
- 5v step-down voltage regulator\\
- Antennas: **[[http://www.banggood.com/Aomway-5_8GHz-FPV-4-Leaf-Clover-AV-Transmission-RHCP-Antenna-1-Pair-p-961730.html?p=7G14111777398201506Z|Aomway**5.8GHz FPV 4 Leaf SMA]]**\\
- On Screen Display: [[https://fpvracing.ch/en/osd/770-minim-osd.html|Micro Mini OSD]]

OTHERS:

- (3S) 4 Pin JST-XH Balancer Connectors\\
- Heat Shrink Tube

===== Software =====

Cleanflight: [[https://goo.gl/oq78Z2|https://goo.gl/oq78Z2]]\\
MW OSD pour Micro Mini OSD: [[http://www.mwosd.com/|http://www.mwosd.com/]]

===== 3D Printed parts =====

[[http://www.thingiverse.com/groups/fablab-la-cote/things|Fablab La cote Thingiverse\\ ]]

- QAV210 Lisam TX Eachine ET526 holder

===== Trucs et astuces =====

MONTAGE

VOL

Piste : • playground • imprimante-3d • calibrage • plotter_pcut_1200 • outils • decoupeuse-laser • install_rdworks • how-to • silhouette_cameo • makey-makey-fondue

Recherche

Navigation

Imprimer/exporter

Outils